Coating industrial labor protection gloves anti skid wear resistant

coating industrial labor protection gloves anti-skid wear-resistant

Protective gloves:

Is Labour protection glove, is known as one of the oldest in the gloves, head layer cowhide, goat, pig and sheep skin, by these leather gloves is made, and not easy to be damaged, long service life and fine processing of leather gloves to wear comfortable, take goods accurately and leather gloves also has advantages of heat and insulation performance better.

Types of materials

The first layer leather: The outermost layer of leather, taken from the skin of leather, which does not require any mechanical processing or finishing. Advantages of the first layer gloves: dexterous operation, comfortable, accurate grip performance.

Second floor leather: The inner layer of leather is obtained by cutting or removing the outer layer of dermis. Advantages of two leather gloves: wear-resistant, suitable for heavy manual labor. The types of dermis and its advantages Cow: Cow skin: Most protective gloves use cow skin, mainly scraped from the ribs.

Features: soft, flexible, comfortable with good abrasion resistance, tear resistance and puncture resistance. Second leather: Most gloves made of second leather are used for handling and heat protection purposes. Usually choose to use the double skin of the back of cattle, less choose the convex shoulder, the double skin of the rib is not good quality, generally rarely used. Features: lower cost than cow skin, excellent wear resistance.

Goat: Single cortex: its normal thickness can not pull out two layers of skin, it has the advantage of being lighter than cowhide. Because it uses the original thickness, it is suitable for making gloves with good mechanical resistance. Because the fiber is not cut, its wear resistance and puncture resistance are enhanced. If it is mixed, it will have better contact effect. Features: soft, flexible, good wear resistance, tear resistance, puncture resistance. Its wear resistance depends on the thickness of the leather, usually 1.1-1.3mm (good mechanical properties) or 0.6-1.0mm (good flexibility and dexterity). Pig: Head and second skin of pig: mostly in Asian countries, used for simple isolation gloves due to its poor mechanical resistance and poor dexterity when blended. Features: Low price. Lamb skin: Single layer leather: Due to its poor wear and tear resistance, it is usually only used to make ordinary gloves.

The thickness of a lamb's skin is proportional to its dexterity, and the thinner it is, the more dexterous and comfortable it is to wear. Features: soft and dexterous. The resistance of leather and the main use of leather gloves Top leather gloves: Handling or handling of small and medium objects. Oiled waterproof leather gloves: installation of oily parts, handling of oily steel plates, woodworking, outdoor or wet work. Two layers of leather gloves: installation and handling of sharp objects, cutting work, slippery objects and welding products. Heat resistant two layer leather gloves: hot objects, demoulding and welding operations. Coated two layer leather gloves: heavy objects, sharp objects handling, antifouling.

Special handling of glove leather The beach: Treatment with mineral oil or fluorinated resin to prevent water entry can improve the mechanical properties of the leather to make it more wear-resistant, increase the comfort (softness) and extended dexterity (touch) of the glove, and extend the service life. Waterproof gloves features: Better dexterity, softness after use in wet areas, longer service life, comfort and accuracy. Oiled waterproof skin: treated with mineral oil or fluorinated resin to prevent water and oil from entering. This treatment improves the mechanics of the leather, makes it more wearable, increases glove comfort (softness) and extended dexterity (touch), and extends glove life. Waterproof leather gloves features: Better dexterity, can stay soft after use in oily and wet areas, longer service life, accurate action. Heat resistant leather: Treated to make leather more heat resistant and reduce shrinkage when exposed to fire. The process brings the leather into contact with a heat source that makes it easy to identify and dyes the leather yellow. This treatment can also be used for the first layer of skin.

Two layers of polyurethane coating: PU coating on the second layer of leather can prevent water and oil from entering and improve the mechanical properties of leather. Material to cushion vibration: Before choosing vibration-resistant materials, you must know the following information: Frequency of vibration Is it intermittent or continuous vibration, continuous vibration from round-trip tools and rotary tools or continuous vibration from air pressure tools. Leather or textile appearance: The soft cushioned structure makes the skin of the hand feel comfortable, and the GELFOM damping layer consists of two layers of rubber foam to protect the GELFOM damping layer, which is ideal for damping and absorbing vibration.

Insulation gloves Commonly used 12 kv rubber insulation gloves and 35 kv rubber insulation gloves. 12 kV rubber insulating gloves Rubber insulated gloves, factory test voltage 12000V. Mainly used as auxiliary safety appliance in high voltage power equipment above 1000V. Used as basic safety appliance in low voltage electrical equipment up to 1000V. Light industry assemblers, material handling personnel, container handling personnel, transporting or receiving cargo personnel, packaging, maintenance personnel, home laundry.